SEW-Eurodrive MOVIFIT-FC, Руководство по эксплуатации, Страница: 8 / 172

2
Safety Notes
Designated use
8
Operating Instructions – MOVIFIT
®
-FC
2.3 Designated use
MOVIFIT
®
-FC is a component intended for installation in electrical systems or
machines.
When MOVIFIT
®
-FC is installed in machines, startup of the MOVIFIT
®
-FC (i.e., start of
designated operation) is prohibited until it is determined that the machine meets the
requirements stipulated in EC directive 98/37/EC (Machine directive).
Startup (i.e. the start of designated use) is only permitted under observance of the
EMC directive (2004/108/EC).
MOVIFIT
®
-FC meets the requirements stipulated in the low voltage directive
2006/95/EC. The standards contained in the declaration of conformity are used for
MOVIFIT
®
-FC.
Technical data and information on the connection requirements are provided on the
nameplate and in the documentation; these must be observed under all circumstances.
2.3.1 Safety functions
MOVIFIT
®
-FC may not perform any safety functions unless they are described and
expressly approved.
For safety applications, ensure that the information in the following publication is
observed.
• Safe Disconnection for MOVIFIT
®
Use only components in safety applications that were explicitly designed and supplied
for this purpose by SEW-EURODRIVE.
2.3.2 Hoist applications
Hoist applications can be implemented with MOVIFIT
®
-FC only under the following
conditions:
• Hoist applications are possible only in connection with the function levels "Classic"
or "Technology".
• A hoist startup must be performed.
Do not use MOVIFIT
®
-FC as a safety device in hoist applications. Use monitoring sys-
tems or mechanical protection devices as safety equipment to avoid possible damage
to property or injury to people.
2.4 Other applicable documentation
In addition, note the following publication:
• "DR/DV/DT/DTE/DVE AC Motors, CT/CV Asynchronous Servomotors" operating
instructions
• "AC Motors DRS/DRE/DRP" operating instructions