SEW-Eurodrive MOVIDRIVE MD*60A Series, Руководство по эксплуатации

Страница: 31 / 102

MOVIDRIVE
®
MD_60A Operating Instructions
29
Combinations of options
4.10 Combinations of options
The following tables show the possible combinations of options in the status as supplied.
The meaning of the individual table entries is as follows:
MDF / MDV / MDS
Combinations of options, applies to all MOVIDRIVE
®
units
1)
:
Example
If a MOVIDRIVE
®
MDV or MDS is equipped with the fieldbus interface PROFIBUS type
DFP11A and synchronous operation card type DRS11A options, then the DFP11A must
be connected to the OPTION1 (L) slot and the DRS11A to the OPTION2 (R) slot.
- The options cannot be used in conjunction with one another.
L | R
Connect the option in the first column (
↓
) to the OPTION1 slot.
Connect the option in the title row (
→
) to the OPTION2 slot.
R | L
Connect the option in the first column (
↓
) to the OPTION2 slot.
Connect the option in the title row (
→
) to the OPTION1 slot.
02714BXX
Fig. 23: Configuration of option slots
OPTION1 (L) OPTION2 (R)
CONTR
OL
TERMINAL
↓ →
DIP11A
DFP11A
DFP21A DFI11A
DFI21A DFC11A
DFO11A
DFD11A DIO11A DRS11A
1)
No 2nd
option
DIP11A - R | L R | L R | L R | L R | L
2)
R | L R
DFP11A
DFP21A
L | R - - - - L | R L | R L
DFI11A
DFI21A
L | R - - - - L | R L | R L
DFC11A
DFO11A
L | R - - - - L | R L | R L
DFD11A L | R - - - - L | R L | R L
DIO11A L | R
2)
R | L R | L R | L R | L L | R
3)
R | L R
DRS11A L | R R | L R | L R | L R | L L | R - R
1) Exception for DRS11A: MOVIDRIVE
®
MDV or MDS is required for this option.
2) Only the binary terminals of the DIO11A can be set using parameters P6__. The binary terminals of the DIP11A are only available via
the IPOS
plus®
system variables (
→
IPOS manual).
3) The "input/output card type DIO11A" option can be connected in pairs. In this case, when the DIO11A is connected to "OPTION2 (R)",
bear in mind that the analog inputs/outputs cannot be used and the binary terminals cannot be set using parameters P6__. The binary
terminals of the DIO11A on "OPTION2 (R)" are only available via the IPOS
plus®
system variables (
→
IPOS manual).