4
Installation notes
Mechanical installation
Manual – MOVI-C
®
CONTROLLER advanced with PROFINET IO Fieldbus Interface
25
Master module
X8
0
L /A
L1
L2
L3
L4
T1 XM
S3
X85
US
1
BF
L /A
L /A
X40
X41
L5
L6
L / A
X81
X30
X5
L / A
UHX45A-N
[2]
[1]
[4]
[3]
[5]
[6]
[7]
21394940683
[1]
MOVI‑C
®
CONTROLLER
[5]
Cam
[2]
L-carrier MDM90A
[6]
Recess for cams
[3]
Touch guard
[7]
Pry-out recess
[4]
Screw
Mounting the L-carrier
Proceed as follows:
1. Remove the touch guard [3] at the housing of the L-carrier [2]
2. Install the housing of the MOVI‑C
®
CONTROLLER [1] so that the cams [5] fit into
the recesses [6] at the housing of the L-carrier [2].
3. Push the housing of the MOVI‑C
®
CONTROLLER [1] downward until it touches the
housing of the L-carrier.
4. Tighten the screw [4]
5. Install the touch guard [3] again
Removing the L-carrier
Proceed as follows:
1. Remove the touch guard [3] at the housing of the L-carrier [2]
2. Loosen the screw [4]
3. Pull the housing of the MOVI-C
®
CONTROLLER [1] upward. Recess [7] can be
used to pry out the housing if necessary.
4. Remove MOVI-C
®
CONTROLLER housing to the front.
24777730/EN – 01/2018
