manualshive.com logo in svg

SEW-Eurodrive DH 21B Series, Руководство пользователя, Страница: 7 / 92

Поделиться
Скачать
SEW-Eurodrive DH 21B Series Скачать руководство пользователя страница 7

1

General information

Rights to claim under limited warranty

Manual – DHE/DHF/DHR21B (standard) and DHE/DHF/DHR41B (advanced)

7

Hazard symbol

Meaning

Warning of dangerous electrical voltage

Warning of hot surfaces

Warning of risk of crushing

Warning of suspended load

Warning of automatic restart

1.2.3

Structure of embedded safety notes

Embedded safety notes are directly integrated into the instructions just before the de-
scription of the dangerous action.

This is the formal structure of an embedded safety note:

  SIGNAL  WORD

  Type  and  source  of  hazard.  Possible  consequence(s)  if  disreg-

arded. Measure(s) to prevent the hazard.

1.3

Rights to claim under limited warranty

Read  the  information  in  this  documentation.  This  is  essential  for  fault-free  operation
and fulfillment of any rights to claim under limited warranty. Read the documentation
before you start working with the unit!

1.4

Content of the documentation

The current version of the documentation is the original.

This  document  contains  additional  safety-relevant  information  and  conditions  for  use
in safety-related applications.

22900055/EN – 08/2016

Содержание DH 21B Series





























































































Отзывы:

Нет отзывов