manualshive.com logo in svg

SEW-Eurodrive DH 21B Series, Руководство пользователя, Страница: 57 / 92

Поделиться
Скачать
SEW-Eurodrive DH 21B Series Скачать руководство пользователя страница 57

7

Project planning and startup with MOVITOOLS

®

 MotionStudio

Startup of the fieldbus at the DHR21B/41B controller

Manual – DHE/DHF/DHR21B (standard) and DHE/DHF/DHR41B (advanced)

57

If  you  compare  the  IP  addresses  with  the  subnet  masks,  you  see  that  in  the  binary
representation of the subnet mask all ones determine the network address and all the
zeros determine the station address (see following table).

Byte 1

Byte 2

Byte 3

Byte 4

IP address

decimal

192

. 168

. 10

. 129

binary

11000000

. 10101000

. 00001010

. 10000001

Subnet mask

decimal

255

. 255

. 255

. 128

binary

11111111

. 11111111

. 11111111

. 10000000

The class C network with the address 192.168.10. is further subdivided by the subnet
mask  255.255.255.128.  2  networks  are  created  with  the  address  192.168.10.0  and
192.168.10.128.

The following node addresses are permitted in the two networks:

•

192.168.10.1 ... 192.168.10.126

•

192.168.10.129 ... 192.168.10.254

The  network  nodes  use  a  logical  AND  operation  for  the  IP  address  and  the  subnet
mask to determine whether a communication partner is present in the same network
or  in  a  different  network.  If  the  communication  partner  is  in  a  different  network,  the
standard gateway is addressed for passing on the data.

Standard gateway

The  standard  gateway  is  also  addressed  via  a  32-bit  address.  The  32-bit  address  is
represented by 4 decimal numbers separated by decimal points.

Example: 192.168.10.1

The standard gateway establishes a connection to other networks. In this way, a net-
work node that wants to address another node can use a logical AND operation with
the  IP  address  and  the  subnet  mask  to  determine  whether  the  required  node  is  loc-
ated  in  the  same  network.  If  this  is  not  the  case,  the  node  addresses  the  standard
gateway  (router),  which  must  be  part  of  the  actual  network.  The  standard  gateway
then takes on the job of transmitting the data packages.

DHCP (Dynamic Host Configuration Protocol)

Instead  of  setting  the  3  parameters  IP  address,  subnet  mask  and  standard  gateway
manually, they can be assigned automatically by a DHCP server in the Ethernet net-
work.

This means the IP address is assigned from a table, which contains the allocation of
MAC address to IP address.

Parameter P785 indicates whether the DHR21B/41B option expects the IP parameters
to be assigned manually or via DHCP.

22900055/EN – 08/2016

Содержание DH 21B Series





























































































Отзывы:

Нет отзывов