SEW-Eurodrive 18982093, Руководство по эксплуатации

Страница: 9 / 36

2
Safety notes
Transport
Operating Instructions – MOVI4R-U
®
Frequency Inverter Module
9
Startup (i.e. start of regular operation) is permitted with adherence to EMC guideline
only.
Technical data and information on the connection conditions are provided on the
nameplate and in the documentation. Comply with the data and conditions.
2.4 Transport
Inspect the shipment for damage as soon as you receive the delivery. Inform the ship-
ping company immediately about any damage. If the product is damaged, it must not
be assembled, installed or started up.
Observe the following notes when transporting the device:
• Before transportation, cover the connections with the supplied protection caps.
• Place the product only on the base plate during transport.
• Ensure that the product is not subject to mechanical impact.
If necessary, use suitable, sufficiently dimensioned handling equipment.
2.5 Setup and installation
Ensure that the product is installed and cooled according to the regulations in the doc-
umentation.
The product is suited for operation on laboratory benches and on tables. Use standard
laboratory or training equipment where the products can be placed properly and safely
without posing any risk to the learners.
Protect the product from strong mechanical strain. The product and its mounting parts
must never protrude into the path of persons or vehicles. Ensure that components are
not deformed and insulation spaces are not changed, particularly during transportation
and handling. Electric components must not be mechanically damaged or destroyed.
The following applications are prohibited unless the device is explicitly designed for
such use:
• Use in potentially explosive atmospheres
• Use in areas exposed to harmful oils, acids, gases, vapors, dust, and radiation
• Operation in applications with impermissibly high mechanical vibration and shock
loads in excess of the regulations stipulated in EN 61800-5-1
• Use at an elevation of more than 4000 m above sea level
2.6 Electrical connection
Familiarize yourself with the applicable national accident prevention regulations before
working on the product.
Perform electrical installation according to the pertinent regulations (e.g. cable cross-
sections, fusing, protective conductor connection).
Ensure that all of the required covers are correctly attached after the electrical installa-
tion.
The preventive measures and protection devices must comply with the applicable reg-
ulations (e.g. EN 60204-1 or EN 61800-5-1).
28520688/EN – 12/2018