SEW-Eurodrive 18982093, Руководство по эксплуатации

Страница: 20 / 36

5
Startup
Startup procedure
Operating Instructions – MOVI4R-U
®
Frequency Inverter Module
20
1. Activate manual mode in function 10.
2. Enable the motor by setting the motor’s direction of rotation and the speed setpoint
using the control knob.
You can now control the drive in function 10, see the “Function 10 manual mode”
chapter.
Binary controller
1. In function 5, select the setpoint sources (n
x
, n
2
, AI) that digital input DI03 should
switch between, see the “Control / setpoint source” chapter.
2. Select the desired speed setpoint.
ð
When selecting setpoint source n
x
, set speed setpoint n
x
using function 1.
ð When selecting setpoint source n
2
, set fixed speed setpoint n
2
using function 6.
ð
When selecting setpoint source AI, set the speed setpoint by setting the voltage
on analog input AI.
3. Select the setpoint source (n
x
, n
2
, AI) by setting digital input DI03 = 0 V or 24 V
(see the following chapter).
4. Select the direction of rotation by setting digital input DI02 = 0 V (clockwise rota-
tion) or 24 V (counterclockwise rotation).
5. Enable the drive by setting the digital input DI01 = 24 V.
Option 1
X1
REL-NO
X1:1
REL-NO
X1:3
DI-01
X1:5
DI-02
X1:6
DI-03
X1:7
DO-01
X1:4
REL-O
X1:2
ON - 0 - ON
[1]
[2]
[3]
[4]
[5]
[6]
26585593483
Binary control can be performed with the didactics module using switches [1] to [3] or
terminals [4] to [6].
Option 2
1. In function menu 5, select the setpoint sources (n
x
, n
2
, AI) between which the di-
gital input DI 03 has to switch.
2. Select the desired speed setpoint.
• When selecting setpoint source n
x
, set speed setpoint n
x
in function menu 1.
28520688/EN – 12/2018