SEW-Eurodrive 18982093, Руководство по эксплуатации

Страница: 26 / 36

6
Operation
Manual mode
Operating Instructions – MOVI4R-U
®
Frequency Inverter Module
26
4. When you turn the control knob to the left, you enable counterclockwise rotation
and increase the speed setpoint up to n
max
. When you then turn the control knob to
the right again, you decrease the speed setpoint up to 0.
DI03
Boost
n
n
max
n
x
2
N
P
Ι
U
N
8896144011
DI03
Boost
n
n
max
n
x
2
N
P
Ι
U
N
8900064011
INFORMATION
The illuminated LEDs show the direction of rotation and the speed setpoint of the mo-
tor as a bargraph display from 0 to 100% of n
max
; see the chapter "Function menu 10
– Manual mode".
You disable the drive when you set the speed setpoint to 0.
LEDs 1 and 10 are lit up.
WARNING Risk of crushing if the drive starts up unintentionally.
When manual mode is deactivated, the binary signals at the digital inputs are active.
When manual mode is deactivated, the drive can start up unintentionally if it has been
enabled by the binary signals.
Severe or fatal injuries.
• Before deactivating manual mode, set the binary signals in such way that the drive
is not enabled.
• Change the binary signals again only after deactivating manual mode.
To deactivate manual mode and to switch to the selection menu, briefly press the con-
trol knob.
28520688/EN – 12/2018