Severn Trent VAX4600 Series, Инструкция по эксплуатации

Страница: 11 / 28

- 11 - 115.6001.10
2 INSTALLATION
2.1 Location
The vaporizer should be located as close to the liquid chemical source as possible. The length of chemical
liquid and gas lines should be kept to a minimum. A vaporizing room should have provisions to exhaust any
leaking gas. A lifting device above the vaporizer is also required. See Figure 5 for dimension requirements.
2.2 Mounting
Install the vaporizer on a mounting pad of concrete or other suitable material approximately 2" (50 mm) high.
Secure using 3/8" diameter bolts. See Figure 4 for mounting hole dimensions.
NOTE: It is recommended that the vaporizer cabinet enclosure be removed from the water tank before
moving the unit from the shipping skid to the mounting pad. This will prevent any damage to the cabinet. On
completion of the vaporizer installation, the enclosure can be reinstalled.
Figure 5 - Cabinet Dimensions and Ultility Locations