Menu Radio
25
Green button [Menu] > [Radio]
Here you find all
basic settings
for the
radio. The HS16 does not have mode
settings as known from radios for flying.
Instead controls and servo channel can be
paired freely.
Tip:
Use the advantage to assign
names to all controls and servo chan-
nels - you will benefit from it.
Menu buttons
[OK]
Green
Back to the higher-level menu.
[1v2]
Blue
Shows the number of pages and turns to the
next one.
Softkeys
[Contrast]
Adjust the display contrast so you can easily
read the screen from all angles.
[Light]
Here you can switch the display backlight
on/off. Because the supply current is so low
we recommend leaving it on all the time.
If you press both keys simultaneously, the
automatic mode is activated. You can adjust
the time (in seconds) after which the radio
will turn off the light when in operational
view. When entering the menu the light will
then always be turned on.
[3D stick]
If you equipped your radio with 3D sticks
you can activate the additional rotary func-
tion. The buttons function as level switches
- you decide if the push buttons act as
momentary or memory switch.
[Alarm]
Vibration, acoustic alarm (beeper) and
visual alarm (flashing display light) can be
switched on/off separately. Settings apply to
all alarms - even the ones controlled by the
receiver regarding the model. If the battery
voltage of the internal radio battery falls
below the value set for [Battery alarm] there
is always an acoustic alarm, The visual
alarm can be set additionally.
[DEU/ENG]
Switches the language between German
and English.
10.4 Menu Radio
Basic settings
[Radio name]
Give your radio a name e.g. your first name.
[Rescan]
Cuts the radio connection off and scans the
2.4 GHz frequency band to connect the
receiver again.