Servomex NanoTrace DF-745SG Скачать руководство пользователя страница 81

Страница: 81 / 94

Warranty DF-745SG

12 Warranty

Servomex Corporation warrants each instrument manufactured by them to be free

from defects in material and workmanship at the F.O.B. point specified in the

order, its liability under this warranty being limited to repairing or replacing, at the

Seller's option, items which are returned to it prepaid within one year from delivery

to the carrier and found, to the Seller's satisfaction, to have been so defective.
In no event shall the Seller be liable for consequential damages. NO PRODUCT IS

WARRANTED AS BEING FIT FOR A PARTICULAR PURPOSE AND

THERE IS NO WARRANTY OF MERCHANTABILITY. Additionally, this

warranty applies only if: (i) the items are used solely under the operating

conditions and in the manner recommended in the Seller's instruction manual,

specifications, or other literature; (ii) the items have not been misused or abused in

any manner or repairs attempted thereon; (iii) written notice of the failure within

the warranty period is forwarded to the Seller and the directions received for

properly identifying items returned under warranty are followed; and (iv) with

return, notice authorizes the Seller to examine and disassemble returned products

to the extent the Seller deems necessary to ascertain the cause of failure. The

warranties stated herein are exclusive. THERE ARE NO OTHER

WARRANTIES, EITHER EXPRESSED OR IMPLIED, BEYOND THOSE SET

FORTH HEREIN, and the Seller does not assume any other obligation or liability

in connection with the sale or use of said products.

Содержание NanoTrace DF-745SG































































































Результаты поиска

Содержание NanoTrace DF-745SG

Отзывы:

Servomex NanoTrace DF-745SG, Руководство оператора, Страница: 81 / 94

Результаты поиска

Содержание NanoTrace DF-745SG

Отзывы: