Servomex NanoTrace DF-745SG Скачать руководство пользователя страница 29

Страница: 29 / 94

Options DF-745SG

5 Options

The following options to the DF-745SGSG are available at the time of order.

5.1 Key Lock

An optional key lock can be installed in the door of the analyzer to prevent access

to the power switch and other internal components. The lock is supplied with two

keys.
If the analyzer is operating, the key lock does not prevent adjustments from the

front panel.

5.2 Operating Voltage

The analyzer can be wired for operation at either 100-120 Volts AC or 200-240

Volts AC.
The operating voltage is not adjustable in the field.

5.3 Serial Communications

The analyzer can be set for communications by RS-232 or RS-485.
The serial communications option is not adjustable in the field.
See page 25, 62 and 64 for additional information.

5.4 Analog Voltage Output

The maximum analog voltage output can be set at the factory for 0-1, 0-2, 0-5 or

0-10 Volts DC.
The maximum analog voltage output is not adjustable in the field.
See page 26 and 52 for additional information.

5.5 Hydrogen Service Safety System

This option enables the analyzer to be safely used in a hydrogen background

application.
See page 83 for additional information.

Содержание NanoTrace DF-745SG































































































Результаты поиска

Содержание NanoTrace DF-745SG

Отзывы:

Servomex NanoTrace DF-745SG, Руководство оператора, Страница: 29 / 94

Результаты поиска

Содержание NanoTrace DF-745SG

Отзывы: