Servend 2703329 Скачать руководство пользователя страница 5

Part Number 5030763

5/11

1-1

Section 1

General Information

Read This Manual

Manitowoc Beverage Systems (MBS) developed this 
manual as a reference guide for the owner/operator and 
installer of this equipment. Please read this manual 
before installation or operation of the machine. A 
qualified service technician must perform installation and 
start-up of this equipment, consult 

Section 5

 within this 

manual for service assistance.

If you cannot correct the service problem, call your MBS 
Service Agent or Distributor. Always have your model 
and serial number available when you call.

Your Service Agent  ____________________________

Service Agent Telephone Number _________________

Your Local MBS Distributor ______________________

Distributor Telephone Number ____________________

Model Number  _______________________________

Serial Number  ________________________________

Installation Date  ______________________________

Unit Inspection

Thoroughly inspect the unit upon delivery. Immediately 
report any damage that occurred during transportation to 
the delivery carrier. Request a written inspection report 
from a claims inspector to document any necessary 
claim.

Model Numbers

This manual covers the following models:

How to Read a Model Number

!

Warning

PERSONAL INJURY POTENTIAL

Do not operate equipment that has been misused,
abused, neglected, damaged, or altered/modified
from that of original manufactured specifications.

Beverage Dispensers

Model 2P FS, 464 Tower, Bev Tower, 2703405, 

2703406, 2703406, 2703329

S - Ice Dispenser
SV - Ice/Beverage 

Dispenser

i - intelli-carb
QD - quickdraw

Ice Capacity

Model Prefix

Model Suffix

Model Base

SV–250–i

Содержание 2703329

























Отзывы: