Installation Instructions
Section 2
2-4
Part Number 5030763
5/11
Electrical
GENERAL
MINIMUM CIRCUIT AMPACITY
The minimum circuit ampacity is used to help select the
wire size of the electrical supply. (Minimum circuit
ampacity is not the beverage/ice machine’s running amp
load.) The wire size (or gauge) is also dependent upon
location, materials used, length of run, etc., so it must be
determined by a qualified electrician.
ELECTRICAL REQUIREMENTS
Refer to Ice Machine Model/Serial Plate for
voltage/amperage specifications.
MINIMUM CIRCUIT AMPERAGE CHART
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of
malfunction or breakdown, grounding provides a path of
least resistance for electric current to reduce the risk of
electric shock. This appliance is equipped with a cord
having an equipment-grounding conductor and a
grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded
in accordance with all local codes and ordinances.
!
Warning
All wiring must conform to local, state and national
codes.
Important
Due to continuous improvements, this information is
for reference only. Please refer to the dispenser
serial number tag to verify electrical data. Serial tag
information overrides information listed on this page.
Dispenser
Voltage
Amps
Beverage Tower,
Model 2P FS,
464 Tower
24V AC
2.4
(Remote Mount)
!
Warning
The beverage/ice machine must be grounded in
accordance with national and local electrical codes.
!
Warning
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock. The
conductor with insulation having an outer surface that is
green with or without yellow stripes is the equipment
grounding conductor. If repair or replacement of the cord or
plug is necessary, do not connect the equipment-
grounding conductor to a live terminal. Check with a
qualified electrician or serviceman if the grounding
instructions are not completely understood, or if in doubt as
to whether the appliance is properly grounded. Do not
modify the plug provided with the appliance — if it will not fit
the outlet, have a proper outlet installed by a qualified
electrician.
!
Warning
When using electric appliances, basic precautions must
always be followed, including the following:
a. Read all the instructions before using the appliance.
b. To reduce the risk of injury, close supervision is
necessary when an appliance is used near children.
c. Do not contact moving parts.
d. Only use attachments recommended or sold by the
manufacturer.
e. Do not use outdoors.
f. For a cord-connected appliance, the following shall
be included:
• Do not unplug by pulling on cord. To unplug,
grasp the plug, not the cord.
• Unplug from outlet when not in use and before
servicing or cleaning.
• Do not operate any appliance with a damaged
cord or plug, or after the appliance malfunctions or
is dropped or damaged in any manner. Contact
the nearest authorized service facility for
examination, repair, or electrical or mechanical
adjustment.
g. For a permanently connected appliance — Turn the
power switch to the off position when the appliance is
not in use and before servicing or cleaning.
h. For an appliance with a replaceable lamp — Always
unplug before replacing the lamp. Replace the bulb
with the same type.
i. For a grounded appliance — Connect to a properly
grounded outlet only. See Grounding Instructions.
