background image

Part Number 5030763

5/11

4-1

Section 4

Maintenance

Cleaning

DAILY CLEANING

All cleaning must meet your local health department 
regulations. The following cleaning instructions are 
provided as a guide.

You will need clean warm water to wash and rinse with, mild 
non-abrasive soap and a clean cloth to clean the following:

Drain  pan

Grid

Splash panel

Valve nozzles

Diffusers

1. Lift up the grid and remove it from the drain pan. 

2. Using mild soap, warm water and clean cloth, wash the 

drain pan and splash panel. Then rinse with clean, 
warm water. Allow plenty of warm water to run down the 
drain to remove syrup residue that can clog the drain 
opening.

3. Wash the grid, then rinse with clean warm water.

4. Place the grid back in the drain pan.

5. Wash all exterior surfaces of the unit with warm water 

and a clean cloth. Wipe again with a clean, dry cloth.

6. For Flomatic Valves, turn nozzle and pull the downward 

to remove. 

7. Clean both the nozzle and diffuser with soap and water 

to remove syrup residue. (A soft bristle brush can be 
used). 

8. Rinse nozzle and diffuser with warm, clean water.

9. Replace diffuser in the valve body. Position nozzle and 

turn counter clockwise to the stop.

MONTHLY SANITIZING

Mix a sanitizing solution of 1/2 ounce liquid, unscented 
bleach (5.25%Cl Na O concentration) with a gallon of water, 
to supply 100 PPM of available chlorine. Using this solution 
and a clean cloth or soft bristle brush, sanitize the parts 
mentioned in the daily cleaning procedure. Allow parts to air 
dry and then re-assemble.

!

Caution

Use only warm soapy water to clean the exterior of the
tower. Do not use solvents or other cleaning agents. Do
not pour hot coffee into the drain pan. Pouring hot
coffee down the drain pan can eventually crack the
drain pan, especially if the drain pan is cold or still
contains ice.

!

Warning

Electric Shock Hazard

Unplug unit before servicing or cleaning.

!

Warning

When using cleaning fluids or chemicals, rubber
gloves and eye protection must be worn.

Valve Nozzle & 
Diffusers

Soda or Flavor 
Shot Valves

Drain Pan 
Grid

Drain Pan

Splash

Panel

Содержание 2703329

























Отзывы: