USA
page 30
USER SECTION
6. MAINTENANCE
6.1 Routine maintenance
ATTENTION: The machine is not protected against pressurized water sprays. Do not use pressure
cleaning systems against the machine.
It is recommended to contact your chemicals distributor for proper cleaning instructions, in order
to have detailed indications on methods and products suitable for the correct periodical machine sanitation.
Do not use bleach or detergents containing chlorine.
To ensure the best performance of the machine a proper and systematic cleaning is required. The following shall be carried
out, at least once/day:
• Turn off the ON/OFF switch.
• Turn off the water valve.
• Drain the water removing the overflow pipe.
For appliances provided with emptying pump, remove the overflow tube, turn off the ON/OFF switch (see chap.
4
), and
press button
5
(see chap.
4
) until all the water has been completely emptied.
• Remove the filter and clean it with a brush under running water.
• Remove the rotors by loosening the fixing screws, and thoroughly clean the nozzles and cleaning and rinsing arms under
running water.
• Reassemble all parts and refit the rotors in their seats, fixing them with the relative screws.
• Clean the tub thoroughly using specific products.
•
At the end of the day, it is advisable to leave the dishwasher door open.
Note: It is advisable to replace the tub water by refilling the tub at least every 20 wash cycles, or twice a
day. Do not use metal brushes or corrosive products which can damage the machine.
6.2 Special Maintenance
Once or twice a year have the machine inspected by a qualified technician, in order to:
1 Clean the inlet filter of the solenoid-valve
2 Remove incrustations from the heating elements
3 Check the status and the tightness of all gaskets
4 Check the wearing of each component
5 Check the efficiency of the dosing pumps.
7. ENVIRONMENTAL ASPECTS
7.1 Packing
The packing consists of the following:
•
a wood pallet
•
a nylon bag (LDPE)
•
multi-layered cardboard
•
polystyrene foam (PS)
•
polypropylene support (PP).
Please dispose of the materials listed above, according to the current regulations.
7.2 Disposal
The machine must be disposed of according to current regulations: contact the Municipalized Firm responsible
for collection of urban solid waste.
Before disposing of the appliance, disconnect all water and electrical connections.
Cut the electrical cable in such a way as to prevent further use.
As all metal parts are stainless steel, they are therefore recyclable.
Recyclable plastic parts are identified by the plastic symbol.
Содержание DS 50 USA
Страница 1: ...DS 50 USA User Install Manual 3 2019...
