Sequoia LISST-Hydro, Руководство пользователя

Страница: 25 / 57

19
You can also click on the Open Session button and choose Master
Controller, then click the OK button.
This will start the data collection. If data has been collected in the
past it will be immediately displayed on the Monitor screen.
The first thing the software will do is command the instrument to take
a measurement. The instrument will do the various steps required to
get a measurement and then transmit the raw data to the software.
The software will process the raw data into size distributions and
then add a data point to the 4 displays. The procedure will repeat at
the update rate that was set in Step 3 in section 2.2.2.
Step 3: Monitor
data using
Monitor Mode
The LISST-Infinite Monitor , Master Controller Mode is only being used
to start the sampling of data from a LISST-Infinite or a LISST-HYDRO
connected to the PC.
Since we have now started the data collection from the connected
instrument, we can proceed with the monitoring of the data. In order to
monitor the data stream from the instrument, please proceed with
section 2.2.2. LISST-Infinite Monitor , Monitor Mode