Sentera Controls MCS-1-LCD, Монтаж и эксплуатация

Страница: 31 / 33

www.sentera.eu
MIW-MCS-1-LCD-EN-000 - 20 / 07 / 2016 31 - 33
back to the table of contents
HOLDING REGISTERS
Data type Description Data Default Values
55 Analogue output type (Ao1) unsigned int.
Disables or selects the analogue output
type for Ao1
0—5 1
0 =
1 =
2 =
3 =
4 =
5 = Not in use
0—10 VDC
2—10 VDC
0—20 mA
4—20 mA
PWM
56
Analogue output function
(Ao1)
unsigned int. Sets the output function for Ao1 0—2 0
0 =
1 =
2 = Linear
Control
PID
57 Analogue output mode (Ao1) unsigned int.
Analogue output mode: Cool
(0—10 VDC) / Heat (10—0 VDC)
0—1 0
0 =
Cool
0—10 VDC (2—10 VDC)
0—20 mA (4—20 mA)
0—100 %
1 =
Heat
10—0 VDC (10—2 VDC)
20—0 mA (20—4 mA)
100—0 %
58
Minimum value of the
analogue output (Ao1)
unsigned int.
Minimum value of the analogue output
Ao1, calculated from the control range
of the normally assigned input, in
percentages
0—40 0
0 =
40 =
0 %
40 %
59
Maximum value of the
analogue output (Ao1)
unsigned int.
Maximum value of the analogue output
Ao1, calculated from the control range
of the normally assigned input, in
percentages
60—100 100
60 =
100 =
60 %
100 %
60
Assign normal input to
analogue output (Ao1)
unsigned int.
Assigns normal analogue or temperature
input to analogue output Ao1
0—3 0
0 =
1 =
2 =
3 = T1
T2
Ai1
Ai2
61
Assign high priority input to
analogue output (Ao1)
unsigned int.
Assigns high priority analogue or
temperature input to analogue output
Ao1.
Active only if controlled output is
selected.
0—3 2
0 =
1 =
2 =
3 = T1
T2
Ai1
Ai2
62
Time to maximum output
(Ao1)
unsigned int.
Time for the output to rise to maximum
value.
Active only if control function is
selected.
0—100 s 60 s 60 = 60 s
63 Kp value (Ao1) unsigned int.
Proportional gain value for Ao1.
Active only if a PID function is selected.
1—1.000 10 10 = 1,0 gain
64 Ti value (Ao1) unsigned int.
Integration period value for Ao1.
Active only if a PID function is selected.
1—6.000 100
1 =
100 =
0,1 s
10 s
65 Td value (Ao1) unsigned int.
Derivative period value for Ao1.
Active only if a PID function is selected.
0—6.000 10
0 =
10 =
0 s
1 s
66
Analogue output (Ao2)
relation to
(Ao1)
unsigned int.
Sets the relation between analogue
output Ao1 and analogue output Ao2
0—2 0
0 =
1 =
2 = Free (without relation)
Balanced
Unbalanced
67 Unbalanced coefficient (Ao2) signed int.
Difference between analogue output Ao1
and analogue output Ao2 in percents.
Active only in unbalanced mode.
-200—200 0 200 = 20 %
68 Analogue output type (Ao2) unsigned int.
Disables or selects the analogue output
type for Ao2
0—5 1
0 =
1 =
2 =
3 =
4 =
5 = Not in use
0—10 VDC
2—10 VDC
0—20 mA
4—20 mA
PWM
69
Analogue output function
(Ao2)
unsigned int.
Sets the output function for Ao2. Active
only if not in relation.
0—2 0
0 =
1 =
2 = Linear
Control
PID
70 Analogue output mode (Ao2) unsigned int.
Analogue output mode: Cool (0—10 VDC)
/ Heat (10—0 VDC)
0—1 0
0 =
Cool
0—10 VDC (2—10 VDC)
0—20 mA (4—20 mA)
0—100 %
1 =
Heat
10—0 VDC (10—2 VDC)
20—0 mA (20—4 mA)
100—0 %
78 Td value (Ao2) unsigned int.
Derivative period value for Ao2.
Active only if a PID function is selected.
0—6.000 10
0 =
10 =
0 s
1 s
71
Minimum value of the
analogue output (Ao2)
unsigned int.
Minimum value of the analogue output
Ao2, calculated from the control range
of the normally assigned input, in
percentages
0—40 0
0 =
40 =
0 %
40 %
72
Maximum value of the
analogue output (Ao2)
unsigned int.
Maximum value of the analogue output
Ao2, calculated from the control range
of the normally assigned input, in
percentages
60—100 100
60 =
100 =
60 %
100 %
73
Assign normal input to
analogue output (Ao2)
unsigned int.
Assigns normal analogue or temperature
input to analogue output Ao2.
Active
only if not in relation.
0—3 0
0 =
1 =
2 =
3 = T1
T2
Ai1
Ai2
MCS-1-LCD
MULTIFUNCTIONAL LOGIC
CONTROLLER