Sensit GOLD G2 Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 60

Sensit GOLD G2 Скачать руководство пользователя страница 46

46

CALIBRATION

AUTO CAL (Continued)

Pressing the SAVE/ZERO BUTTON (C) will scroll through the individual

sensors that are configured in your G2 for calibration. Pressing the

TICK/MENU BUTTON (B) selects the option. Attach the proper gas and

wait for the instrument to provide a PASS or FAILED indication.

If the calibration has failed press the TICK/MENU BUTTON (B) to

attempt again or scroll to the next gas. Upon successful calibration the

calibration due date reminder is automatically updated.

From this menu pressing the SAVE/ZERO BUTTON (C) again will

provide access to the SMART-CAL automatic calibration system.

Pressing the TICK/MENU BUTTON (B) from SMART-CAL menu

begins the communication process. Consult the SMART-CAL system

instructions for connection details.

NOTE:

A calibration failure is indicated on the display by FAILED. Re-

calibration should be attempted. Any instrument that does not accept

calibration should be taken out of service.

Please contact SENSIT TECHNOLOGIES for any needed repairs.

«
...
44
45
46
47
48
...
»

Содержание GOLD G2





























































Отзывы:

Нет отзывов