Sennheiser SKP 300 evolution wireless G3, Инструкция по эксплуатации

Страница: 14 / 34

SKP 300 G3 | 13
Using the plug-on transmitter
The current state of the muting function or the RF signal
is displayed on the display panel of the plug-on trans-
mitter:
Selecting a standard display
State
Transmitter’s display
panel
Audio signal and RF signal
are activated (muting is
canceled) “ MUTE ”
7
is not
displayed, transmission
icon
4
is displayed
Audio signal is muted “ MUTE ”
7
is displayed,
transmission icon
4
is
displayed
RF signal is deactivated “ MUTE ”
7
is displayed,
transmission icon
4
is
not displayed
You can also deactivate the RF signal on switch-on.
For more information, refer to the chapter
“Switching the plug-on transmitter on/off” on
page 10.
Using the ON / OFF button, you can also activate/
deactivate the RF signal during operation. To do so,
briefly press the
ON / OFF button and proceed as
described on page 10.
왘
Press the UP or DOWN button to select a stan-
dard display:
Contents of the display Selectable standard display
“ Frequency/Name ”
“ Channel/Frequency ”
“ Name/Channel ”
MHz 543.850
ew300 G3
MUTE
P
AF
ew300 G3
MHz 543.850
MUTE P
AF
MHz 543.850
B.Ch: 19.24
MUTE
P
AF
B.Ch: 19.24
MUTE P
AF
ew300 G3