Sennheiser SKP 300 evolution wireless G3, Инструкция по эксплуатации

Страница: 19 / 34

18 | SKP 300 G3
Adjusting settings via the operating menu
Selecting the frequency bank and the channel
manually – “Frequency Preset”
Overview of the frequency banks and channels:
Entering a name – “Name”
Via the “ Name ” menu, you can enter a freely selectable
name for the plug-on transmitter. The name can be
displayed on the standard displays “
Frequency/Name ”
and “ Name/Channel ” (see page 13) and can consist of
up to 8 characters such as:
• letters (without pronounciation marks),
• numbers from 0 to 9,
• special characters and spaces.
To enter a name, proceed as follows:
When you are in the “ Frequency Preset ” menu
item, the RF signal is deactivated.
Frequency bank Channels Type
“ 1 ” to “ 20 ” up to 24 per
frequency
bank System bank:
frequencies are
factory-preset
“ U1 ” to “ U6 ” up to 24 per
frequency
bank User bank:
frequencies are
freely selectable
When setting up multi-channel systems, please
observe the following:
Only the factory-preset transmission frequencies
within one frequency bank (“
1 ” to “ 20 ”) are inter-
modulation-free. It is vital to observe the notes on
frequency selection on page 23.
왘
Press the UP/DOWN button to select a
character.
왘
Press the SET button to change to the next
segment/character or to store the complete
entry.
Menu
B.Ch: 18.24
Frequency Preset B.Ch:
546.550MHz
Frequency Preset
18 .24 B.Ch:
Frequency Preset
19. 24
Call up “Frequency
Preset” Select the frequency
bank and confirm Select the channel;
store the setting
“Stored”
538.475MHz
Call up “Name” Enter a character
and confirm
Enter a character;
store the setting
Menu
L i c h a e l
Name
Name Name
L i c h a e l
M i chael
“Stored”
SET