Sennheiser SKP 300 evolution wireless G3, Инструкция по эксплуатации

Страница: 12 / 34

SKP 300 G3 | 11
Using the plug-on transmitter
To activate the RF signal :
To switch the plug-on transmitter off :
왘
If necessary, deactivate the lock mode (see page 11).
Deactivating the lock mode temporarily
You can activate or deactivate the automatic lock mode
via the “
Auto Lock ” menu item (see page 19). If the lock
mode is activated, you have to temporarily deactivate it
in order to be able to operate the plug-on transmitter:
Use this function to save battery power or to
prepare a plug-on transmitter for use during live
operation without causing interference to existing
transmission links.
왘
Press the ON / OFF button.
“ RF Mute On? ” appears on the display panel.
왘
Press the UP/DOWN button.
“
RF Mute Off? ” appears on the display panel.
왘
Press the SET button.
The transmission icon
4
is displayed again.
왘
Keep the ON / OFF button
8
pressed until
“ OFF ” appears on the display panel.
The red ON LED
7
goes off and the display
panel turns off.
When in the operating menu, pressing the ON /
OFF button
8
will cancel your entry (ESC function)
and return you to the current standard display.
왘
Press the SET button or the ON / OFF button.
“ Locked ” appears on the display panel.
왘
Press the UP/DOWN button.
“
Unlock? ” appears on the display panel.
왘
Press the SET button.
The lock mode is temporarily deactivated.
– When you are in the operating menu, the
lock mode remains deactivated until you
exit the operating menu.
– When one of the standard displays is
shown, the lock mode is automatically
activated after 10 seconds.
ON/OFF
SET
ON/OFF
ON/OFF SET
SET