Sennheiser SKP 300 evolution wireless G3, Инструкция по эксплуатации

Страница: 18 / 34

SKP 300 G3 | 17
Adjusting settings via the operating menu
Adjusting settings via the
operating menu
he main menu “ Menu ”
Adjusting the input sensitivity – “Sensitivity”
Adjustment range: 0 to –48 dB, adjustable in steps of
6 dB
Make use of the possibility to adjust settings via
the operating menu of the receiver and to transfer
these settings to the plug-on transmitter.
For more information, refer to the instruction
manual of the receiver. The relevant information is
marked with the sync icon.
For the sync function to work, transmitter and
receiver must have at least software version 1.7
(see page 23).
The transmitter’s audio level display “ AF ” always
indicates the audio level, even if the plug-on trans-
mitter is muted, e.g. allowing you to check the
adjusted sensitivity before live operation.
Input sensitivity
adjusted ...
Effect/display
... too high Close talking distances, speakers
with loud voices or loud music
passages cause overmodulation in
the transmission link.
The audio level display “
AF ”
1
shows full deflection for the dura-
tion of the overmodulation.
... correctly The audio level display “ AF ”
1
shows full deflection only during
the loudest passages.
... too low The transmission link is undermod-
ulated. This results in a signal with
high background noise.
Adjust a low input sensitivity when using
condenser microphones, adjust a high input sensi-
tivity when using dynamic microphones.
Menu
–12 dB
S e n s i t i v i t y – 12 dB
S e n s i t i v i t y
–36 dB
S e n s i t i v i t y
“Stored”
Call up
“Sensitivity” Select the desired
setting Store the setting
MHz 543.850
B.Ch: 19.24
MUTE
P
AF