Sennheiser SKP 300 evolution wireless G3, Инструкция по эксплуатации

Страница: 28 / 34

SKP 300 G3 | 27
If a problem occurs ...
If a problem occurs ...
Problem Possible cause Possible solution
Plug-on
transmitter
cannot be
operated,
“
Locked ”
appears on
the display
panel
Lock mode is
activated Deactivate the lock
mode (see page 11).
No operation
indication Batteries are
flat or accu-
pack is flat Replace the batteries
or recharge the accu-
pack (see page 8).
No RF signal
at the
receiver Plug-on trans-
mitter and
receiver are not
on the same
channel Set the plug-on trans-
mitter to the same
channel as the
receiver.
Synchronize the plug-
on transmitter with
the receiver (see
page 23).
Transmission
range is
exceeded Reduce the distance
between plug-on
transmitter and
receiving antennas.
RF signal is
deactivated
(“
RF Mute “)
Activate the RF signal
(see page 12).
RF signal
available,
no audio
signal,
“
MUTE ”
appears on
the display
panel
Plug-on trans-
mitter is muted
(
MUTE )
Cancel the muting
(see page 12).
Receiver’s
squelch
threshold is
adjusted too
high Reduce the squelch
threshold setting on
the receiver.
Plug-on trans-
mitter doesn’t
transmit a pilot
tone Activate the pilot
tone transmission on
the transmitter
(see page 21).