background image

SKP 300 G3

  | 31

Manufacturer Declarations

Manufacturer Declarations

Warranty

Sennheiser electronic GmbH & Co. KG gives a warranty
of 24 months on this product.

For the current warranty conditions, please visit our
web site at www.sennheiser.com or contact your
Sennheiser partner.

In compliance with the following requirements 

RoHS Directive (2002/95/EC)

WEEE Directive (2002/96/EC)

Battery Directive (2006/66/EC)

CE Declaration of Conformity

R&TTE Directive (1999/5/EC)

The declaration is available at www.sennheiser.com.

Before putting the product into operation, please
observe the respective country-specific regulations.

Statements regarding FCC and Industry Canada

This device complies with Part 15 of the FCC Rules and
with RSS-123 of Industry Canada. Operation is subject
to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must
accept any interference received, including interference
that may cause undesired operation.

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment gener-
ates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio commu-
nications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by
turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of
the following measures:

Please dispose of the plug-on transmitter at the
end of its operational lifetime by taking it to
your local collection point or recycling center for
such equipment.

The supplied batteries or rechargeable batteries
can be recycled. Please dispose of them as
special waste or return them to your specialist
dealer. In order to protect the environment, only
dispose of exhausted batteries.

0682

Содержание SKP 300 evolution wireless G3



































Отзывы: