Senergy SE 10K Series, Руководство пользователя

Страница: 42 / 62

Figure 5.19 RS485 wiring diagram
Step 1 Remove an appropriate length of the insulation layer from the cable using a
wire stripper, as shown in Figure 5.20.
Figure 5.20 Stripping an RS485 communications cable (unit: mm)
Step 2 Remove the screws at the inverter bottom to remove the metal plate, shown in
Figure 5.21.
Figure 5.21 Removing the metal plate
Step 3 Take RS485 cable out of accessory kit, and remove the locking caps from the
485 IN and 485 OUT waterproof cable connectors. Route RS485 cables through
42