USER MANUAL – ZC-SG
9
Mode
The station can be configured in two modes:
Mode=1: a known weight must be used to calibrate the system on site.
Mode=0: no need to use a known weight to calibrate the system, the station will use the factory
calibration values.
Cell sensibility
The object sets the cell mV/V sensibility:
0=±1 mV/V
1=±2 mV/V
2=±4 mV/V
3=±8 mV/V
4=±16 mV/V
5=±32 mV/V
6=±64 mV/V
7=from object 0x2108 sub1
Digital out logic
Defines the operation that will cause the switch to ON or OFF for the digital output.
DIGITAL OUT LOGIC
Value
Description
0
The output is normally opened
1
The output is normally closed
