OmniHub 16 – User Manual
Page
84
of
112
3.3.19.2
Module Output
•
TS setting: Please refer to IP output service configuration on page 30.
•
LCN setting: You need to add NIT stream of all frequencies in the base TS
(frequency). It is used for your STB to automatically search and identify all the TS
(frequencies) LCN information.
•
Check or reset each TS (frequency) Original Network ID and TS ID, which should
be different in each TS.
•
Fill the Original Network ID and TS ID of each TS (frequency) in the field of the
base TS (frequency) and then click Add to create a NIT stream of this TS
(frequency).
•
Click the “+” icon of Descriptor and add the TS Information Descriptor in. Then fill
in the correct parameters and click OK. (This operation should be set on
Modulator module only)
Name
Range
Name
Range
Bandwidth (MHZ)
6M
RF level
90~110
Frequency (KHz)
48000~862000
FFT Mode
2K
GI Mode
1/4, 1/8, 1/16, 1/32
RF Level Gain (dB)
45~55
QAM Mode
QPSK
16QAM
64QAM
Convolutional
Coding
1/2, 2/3, 3/4, 5/6, 7/8
