OmniHub 16 – User Manual
Page
80
of
112
3.3.15.2
Module Basic Settings
This page allows you to type in the output parameter for the QAM required by the
network.
Click the
Apply
button on the right side to make the change take effect.
Name
Range
Name
Range
Bandwidth (MHz)
6
Channel Standard
US cable/STD/IRC/
HRC
Symbol Rate (KB
aud)
5056.941 (QAM 64)
5360.537 (QAM 256)
RF level
15~48 (dBmV)
PSI/SI Interval
(ms)
50~10000
Constellation
QAM 64/256
Channel No.
Up to Channel Standard
3.3.15.3
Module Output
Service Configuration for QAMB are very simple compared to QAMA. You can edit the
Original network ID and TSID to the correct label. You can also edit the Service
parameter like Service ID, Name, Provider, PID, etc.,
System operation of OHM-QAMB is same with other modules. See page 74 to 77 for
reference.
3.3.16
OHM-QAMB-R01/R01A
OHM-QAMB-R01 is a 4 channel QAM B Modulator module while OHM-QAMB-R01A is
an 8 channel QAM B modulator. The Status, Setting Service Configuration and System
