Impulse 100E
– User Manual
Page 9
(48)
1.1 Product Introduction
The Impulse 100E is a cost-effective single-channel encoder and streamer for audio and
video processing and transport. It supports professional encoding and IP streaming for
live encoding, uploading, and playback.
1.2 Front Panel Overview
The Impulse 100E can be controlled from the front panel with the LCD screen and buttons
that are shown below in Figure 1. A detailed description of using the front panel can be
found in Section 3.
Figure 1: Impulse 100E Unit Front Panel
1. Reset Button: pressing this will reboot the Impulse 100E.
2. LCD Screen: shows menus for user status and unit control
3. Up, Down, Left, Right, OK and Menu Buttons: provides navigation and entry within
LCD screen menus
4. Error Indicator: light indicates red when the unit is in alarmed condition
5. USB Port: purposed for storage while using the record and playback features.
Note: the Impulse 100E is only compatible with the FAT32 USB/SD format.
1.3 Rear Panel Overview
The Impulse 100E comes standard with all of the hardware back panel features shown
and listed below except where noted as an Impulse 100E-01 or Impulse 100E-02 exclusive
option. Refer to the Figure 2 at the top of the next page.
1
2
3
4
5
