Impulse 100E
– User Manual
Page 31
(48)
4.4 Recording Mode
Basic Setting
1. Connect a USB disk to the Impulse 100E.
2. Set the encoding parameters, and click the start icon to start recording or click the
pause icon to stop the recording.
3. Click the status icon to reflect to the Status Page.
Figure 21: Recording Mode Page
Note: After exceeding the minimum available free USB space of 10MB, the Impulse 100E
will overwrite the oldest file created by it. This unit will not overwrite pre-existing files on
the USB. The Impulse will not record if the available free USB space is occupied by pre-
existing files or if the USB is not connected.
Recording Status
This page offers the status of the recording and the storage of the connected USB Disk.
Figure 22: Recording Status Page
