Impulse 100E
– User Manual
Page 14
(48)
11. Use the
and
buttons to move the cursor to “Host
Mask”, then press the
button to enter the menu
where Host Mask can be viewed and configured.
12. Press the
button to initiate changing the Mask. Use
the
and
buttons to change the value of the digit
and the
and
buttons to change the location.
13. Use the
and
buttons to move the cursor to “Host
Mask”, then press the
button to enter the menu
where Host Mask can be viewed and configured.
Host DNS
14. Press the
button to initiate changing the DNS. Use
the
and
buttons to change the value of the digit
and the
and
buttons to change the location
8.8.8.8
15. Press
to apply. The IP will now be accessible on the
network it was configured to!
2.4.2
DHCP
The Impulse 100E can be configured to use DHCP to obtain an IP address/Subnet
Mask/Gateway.
1. The native screen on the Impulse 100E is the
“Status”
page. This will report the name of the unit, its current IP
as well as the status of the input (used in tandem with
the red/green LED light on the front panel).
2. Press the
button to enter the page where settings
can be viewed and configured.
3. Use the
and
buttons to move the cursor to
“Setting”, and then press the
button to enter the
system menu.
NetMode
Host IP
Host GateWay
Host Mask
255.255.255.0
IMPULSE 100E
192.168.1.100
Mode Live ON
HDMI No Signal
OK
Live
Playback
Record
Setting
Work Mode
System
