8
The final cord adjustment now needs
to be made. The number of turns in
tightening the tension bolts will vary
from shade to shade.
Start by tightening each side one
full turn. Try operating the shade
from full open to full closed. If
the shade feels tight or is difficult
to move; decrease the amount of
tension in each side equally (turn bolt
counterclockwise). If the shade won’t
stay fully open or closed; increase
the amount of tension in each side
equally (turn bolt clockwise). If the
middle rail won’t close evenly across
the bottom rail then you need to adjust
one or both of the cords to get equal
amounts of tension in each.
When installation is complete, operate
the shade up and down several times
to evenly distribute the grease.
Wipe off any excess grease to prevent it
from getting on the fabric.
Loosen
Tighten
