SelectBlinds Skylight Скачать руководство пользователя страница 31

Страница: 31 / 31

TROUBLESHOOTING

Problem

Solution

The motor does not work and the

shade is stuck in the closed position.

Carefully pull down on the moving

rail enough to allow access. Follow

solution below. If this is required,

limits will need to be reset. See Adjust

Motor Limits section for setting limits.

The motor does not work

1. Recharge Battery

2. If using a solar panel - be sure that

the panel is facing the sun

3. If using a solar panel - there may

have been a high draw (operating

shade often) with limited sun exposure

(multiple cloudy days). If this happens

a DC charger may be purchased to

give the rechargeable batteries in the

shade a boost. Contact your dealer for

a charger

The indicator light on the remote does

not shine or the remote-controlling

range becomes shorter

Replace the battery in the remote

(CR2450)

Supplier’s Declaration of Conformity

47 CFR § 2.1077 Compliance Information

Unique Identifier:

1032832 (BF-415A), 1032833(BF-415AB)

Responsible Party - US Contact Information

Window Covering Manufacturer

21 Elm Street

Maplewood, NY

12189

Phone #: (800) 843-4151

FCC Compliance Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to following two conditions

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance

could void the users authority to operate the equipment.

Содержание Skylight
































Результаты поиска

Содержание Skylight

Отзывы:

Бренды по названию

Популярные бренды

SelectBlinds Skylight, Инструкции по установке и уходу

Результаты поиска

Содержание Skylight

Отзывы:

Бренды по названию

Популярные бренды