3
STEP 2: BRACKET INSTALLATION
Shades are shipped with the required
number of brackets for proper
installation. End brackets should be
located approximately 3” from either
end. Depending on the width of the
shade, additional brackets may be
necessary, evenly spaced between the
two end brackets.
Using the installation bracket as a
template, measure to the edge of the
bracket and mark the hole locations
with a pencil for drilling. When
mounting brackets, make sure they are
in line.
3”
STEP 3: INSTALL SOLAR PANEL
(IF NOT USING SOLAR PANEL SKIP TO STEP 4)
The solar recharge unit should be placed
where is gets the maximum amount of
sunlight per day.
In most cases this can be
achieved by mounting the unit directly to
the glass with dual lock.
Brackets are provided if attaching to the glass
is not possible.
The brackets may be mounted several
different ways depending on the application
(window depth, window width, etc.).
The unit requires 19” minimim window
width to mount horizontally.
Bottom portion of the bracket
may be lowered if needed for
more sun exposure.
Bracket can be mounted
behind or next to shade
mounting bracket.
Note: only two of the holes are
threaded.
3”
