Selden Furlex Electric Скачать руководство пользователя страница 3

Страница: 3 / 52

Safety notes regarding the electrical installation for the Furlex Electric:

-The installation should be done by a person with marine installations skills. You can find your local

authorized Furlex dealer at www.seldenmast.com

-Furlex electric is intended only for sail furling purposes together with Seldén furling profiles, controlled

by Seldén’s 42V motor drive system.

-Make sure the system is switched off before performing any installation or service.

-Never modify the electric system of your Furlex or its installation drawings - installation, alterations and

maintenance should be performed by a competent marine electrical technician.

-Never alter or modify the rated current amperage of overcurrent protective devices.

-Never leave the craft unattended with the Furlex Electric energized.

Choosing the correct version of Furlex Electric for your boat:

The key to a safe and properly working installation is correct dimensioning in relation to the boat size the

products shall be used on. Seldén provides dimensioning guidelines in catalogues, leaflets and on the

website. If there are any questions about selecting the right product, please consult an authorized Seldén

dealer. All dealers are listed at www.seldenmast.com and divided in categories describing their competence.

For Furlex Electric we recommend authorized Furlex dealers or dealers in the category “Advanced Technical

Installations”.

Содержание Furlex Electric





















































Результаты поиска

Содержание Furlex Electric

Отзывы:

Похожие инструкции для Furlex Electric

Бренды по названию

Популярные бренды

Selden Furlex Electric, Дополнительное руководство

Результаты поиска

Содержание Furlex Electric

Отзывы:

Похожие инструкции для Furlex Electric

Бренды по названию

Популярные бренды