Selden Furlex Electric, Дополнительное руководство

Страница: 27 / 52

27
3.8 Step by step assembly 204S/304S Retrofit
Prior to installation, read chapter 6.4.2-6.4.4 in manual 597-132. Note that more
references are made to this manual during the assembly. The drum unit has to be
removed from the forestay prior to conversion. Protect the drum unit and motor unit
by working on a clean and soft surface.
Always secure the mast with a halyard before detaching the forestay.
597-132-E
1.
Clean drum unit if necessary.
Remove circlip, washer (including any shim),
balls and ball bearing ring.
Do not lift the line drum as this will
cause top main bearing (A)
to open up.
Do not re-use circlip. A new circlip
is included in the retrofit kit.
A