14
The first straight line is the reference, then check the second straight line. Both line
should be connected, if not, the printhead holder need to be adjusted. Please check the following cases:
Case 1
：
Both line in same vertical position;
No need to adjust
！
Case 2
：
Printheads offset to left side
：
Adjust Procedure：
Case 3
：
Printheads offset to right side
：
Adjust Procedure：
First Pass
Second Pass
First Pass
Second Pass
a) Loosen screws at the printhead holder
b) Turn the screw at
clockwise
direction.
First Pass
Second Pass
a)Loosen the screw at the printhead holder
b) Turn the screw at
anti-clockwise
direction.
