25
4 Daily
maintenance
1) Please print the “
Nozzles Checking
” to make sure all the nozzles are firing fine before switching off the printer.
Then switch off the printer.
2) Prepare solvent, PE film, and 8 pcs of nonwoven fabric(7cm x 2cm) (Figure 5-2).
3) Place the PE film on the capping, and then place the non-woven fabric which is moistened by solvent on
top of the PE film(Figure 5-3)
4) Turn off the printer. Move the carriage away from home. Open the waste tank cover. (Figure 5-4)
Figure5-2
Figure5-3
Figure5-4
