13
2
．
3 Status: After install the printhead, print the nozzle status. Observe the printhead order and position, and
the condition of the printhead.
“Status”shortcut on the main interface
：
Click “Status” to print the following diagram
：
Turn off the feather function when doing the alignment
！
2.4 HVert: Printhead angle alignment. Observe the physical alignment of printheads.
（
This step is not aligned well which will affect the following adjustment
）
“Printhead Vertical”Shortcut on the main interface
：
Click “HVert”, The following diagram will be printed: (K for example)：
