10
First of all, we marked a sign (1) on a certain place of the printer platform, then click “Test Begin”, the media
will be fed a bit, then mark a sign (2) on the same position. Use a ruler to measure the distance between (1)
and (2) as shown below. Enter the actual measurement results into “Move Actual Distance”, then click
"Count", the following dialog will show up.
1.4 X Motor Test: Select "Test" --> "X Motor Test"
This step is mainly testing the status of the motor movement, the carriage will move back and forth 20 times
as you click on "Test ", The test result will be provided in the following dialog box as it is finished.
（
1
（
2
（
1
"Close" is not allowed
during testing
Click "Close" to finish
the test.
