2-36
- Slacken the paper so that it passes inside the winding sensor.
- If the scroller is installed on the winding unit, paper is not cut.
If the winder is not used, shift the scroller from the winder
unit.
NOTE
If the winder is used
If the winder is not used
-
when paper roll for the winder closes to diameter of the
winder’s flange, remove the winder side paper roll and re-
place the paper tube to new one.
If not so, a winding error may occur.
-
When printing without using winder, edge of paper or print-
ing surface may get damege or be folded due to contact to
the winding sensor in the wind.
In case that the paper roll for the winder
exceeds diameter of the winder’s flange.