Seiko IP-4010 Скачать руководство пользователя страница 110

Страница: 110 / 156

3-20

FUNC Menu

This menu is used to execute functions provided for the printer.

When the

key is pressed, functions can be executed.

(1) Cutter replacement (CUTTER CHANGE)

Execute a sequence of cutter replacement.

None

For the details of cutter replacement, see Cutter Replacement of

the Section 2, Basic Operations.

(2) Menu print (MENU PRINT)

Print information on the unit and panel settings.

None

Press key during printing to stop the printing.

(This function is effective after using IP-4500/4010 MKII engine-

SCSI firmware version 5.00.)

(3) Error log information print (ERROR LOG)

Print error log information stored in the printer.

None

Press key during printing to stop the printing.

(This function is effective after using IP-4500/4010 MKII engine-

SCSI firmware version 5.00.)

(4) SCSI trace information print (SCSI TRACE)

Print SCSI protocol trace data. It is printed only when the SCSI

trace is set to ON.

None

Press key during printing to stop the printing.

(This function is effective after using IP-4500/4010 MKII engine-

SCSI firmware version 5.00.)

Содержание IP-4010





























































































































































Результаты поиска

Содержание IP-4010

Отзывы:

Seiko IP-4010, Руководство пользователя, Страница: 110 / 156

Результаты поиска

Содержание IP-4010

Отзывы: