4-4
When an Error Message Appears
If the ERROR lamp lights, check the message shown on the LCD.
There are four types of error messages.
- Service call errors:
Operator unrecoverable errors, such as H/W, S/W failure.
Contact a service center.
- Communication errors:
Communication protocol errors.
Take appropriate action according to an error code or message.
- Data (PDL) errors:
Transmission data or setting errors.
Take appropriate action according to an error code or message.
- Operator call errors:
The operator can correct these errors.
Take appropriate action according to the message.
The error messages are presented below. Take appropriate mea-
sure according to the error message.
If a communication error or a data error occurs, the ERROR
lamp does not light. An error message appears on the LCD
and disappears when the next operation is performed.
Service Call Errors
If any of the following service call error messages are displayed,
turn the power switch off and then on again. This may elimi-
nate the error.
<POC error>
nnnn: Error code
Description
: An unrecoverable error has occurred in the engine section.
(This error message appears when an error is detected
during self-diagnosis after the power is turned on.)
Measure
: Contact your dealer or an SII service center. Report the
error code shown on the LCD.
HINT
HINT
INITIALIZING
E E n n n n