manualshive.com logo in svg

Seiko IP-4010, Руководство пользователя, Страница: 148 / 156

Поделиться
Скачать
Seiko IP-4010 Скачать руководство пользователя страница 148

4-14

Description

: The lever is in up position.

Measure

: Set paper according to the message.

(Others)

Description

: The rear cover is open.

Measure

: Take appropriate measure according to the message.

Description

: The head temperature is out of the operating temperature

range.

Measure

: Use it within the operating temperature range.  Leave the

printer for a while until the head temperature falls within

the range.

Description

: The ambient temperature is not within the operating

temperature range for the printer.

Measure

: Use it within the operating temperature range.

(Network controller only)

Description

: The setup area data is corrupt.

Measure

: Press the 

 key to initialize the setup area.

CLOSE REAR COVER

HEAD TEMP. ERROR

WAIT A MOMENT

ENV. TEMP. ERROR

CHANGE CONDITION

SETUP IS WRONG

    KEY IS INIT.

SET PAPER

PUSH DOWN LEVER

Содержание IP-4010





























































































































































Отзывы:

Нет отзывов