Section 5: Maintenance
Repairs
2018 Insta-Berm (Frame) Operations Manual
(Version D)
28
We Engineer Solutions
1.
Fill the weight bag with water prior to
beginning repairs.
2.
Clean the area to be repaired with an
abrasive pad dampened with solvent.
Remove all traces of masking tape, if
previously used. If possible, place a
piece of masking tape on the back side of
the item being repaired.
3.
Paint the damaged area with glue. Use a
thick coat of glue, overlapping the edges
of the repair by 1" (25 mm). Be sure that
the edges are well coated. A damaged
coating should be given two coats of
glue. Apply the second coat within four
hours of the first coat.
Apply masking tape on the backside of tear.
Squeeze glue around tear and spread with fingers.
Important Note
Allow repair to harden for 24 hours at room temperature before using the item.
