Basic Rider Optimization Training for the Segway
HT
Page 103 of 106
Instructor Guide and Participant Workbook
Rev 3.5i - January 2004
© Segway LLC 2002
P/N 1707100001aa
Match the number in the illustration to the description below:
42. To straighten the
Handlebar, loosen the
Control Shaft Clamp
bolt
________
(7)
that holds this clamp
together,
43. Tap the
Mode Button
________
(1)
to change from Power
Assist to Balance Mode
or hold for 2-3 seconds
to power down.
44. Disconnect the
Control
Shaft
________
(8)
from
the Base, to check the
Control Shaft Cord
connectors.
45. If your Tire/Wheel
assembly wobbles,
check the
Wheel Nut
________
(6)
46. Insert the Control Shaft
into the
Control Shaft
Base
________
(4)
after
you have checked your
Control Shaft cords.
47. Twist the
Steering Grip
________
(2)
left and right to turn, when you are in Balance Mode, or
to power the wheels forward and backward when you are in Power Assist Mode.
48. When you are stepping on, hold onto the
Fixed Grip
________
(9)
and the non-twisting end
of the Steering Grip.
49. Adjust the height of the Handlebar by loosening the
Height Adjustment Collar
________
(3)
,
raising or lowering the Control Shaft, and then tightening the Height Adjustment Collar.
50. To remove a
Battery Pack
________
(5)
, tip the Segway HT to provide access beneath the
Platform, unfasten the four 3mm screws, and slide the Battery Pack straight off the chassis.