Sega SHOOT THIS WIN THIS, Руководство по обслуживанию

Страница: 50 / 93

CONTROL
UNIT
45
10
10.1 Microswitch Replacement
1
�hree �inds of screws are used to fasten the L and R covers. �he L and R covers can be detached
b� removing all ten of these screws.
2
With the R cover on the bottom, remove the L cover b� slowl� lifting it straight up.
3
Remove the trigger microswitch from
the R cover.
4
Remove the soldered part and then remove the microswitch.
5
Solder the new microswitch. Emplo� heat shrin�able tubing to protect the soldered part.
Reassemble the gun. Operate the trigger to full� verif� that the microswitch turns on and off
properl�. �hen, reattach the L cover to the R cover. Do not tighten the screws excessivel�.
6
After replacing the microswitch, refer to the section titled “GA�E �ES� �ODE” . Conduct an Input
�est.
COUNTERSUNAK-HEAD SCREW (1), black
M3 x 8
SCREW (8), black
M3 x 12, w/ small flat & spring washers
SCREW (1), black
M3 x 10, w/ small flat & spring washers
MICROSWITCH
509-5080
FIG. 10a
FIG. 10b