Sega SHOOT THIS WIN THIS, Руководство по обслуживанию

Страница: 66 / 93

COIN
HANDLING
61
12
If the machine is positioned in location where tokens are used, then the SR3 Coin acceptor
can be programmed to accept and credit special coins/tokens
Please follow the instruction below to enable and programthe TEACH AND RUN facility.
BANK 1
Table 1 - Teach and Run Programming Bank 1
Coin NO. SW 1 SW 2 SW 3 SW 4 SW 5 SW 6
1 Off Off Off ON ON Off
2 Off Off ON Off ON Off
3
Off Off
ON ON ON
Off
4 Off ON Off Off ON Off
5 Off ON Off ON ON Off
6
Off
ON ON
Off
ON
Off
BANK 2
Table 2 - Teach and Run Programming Bank 2
Coin NO. SW 1 SW 2 SW 3 SW 4 SW 5 SW 6
7 Off ON ON ON ON Off
8 ON Off Off Off ON Off
9 ON Off Off ON ON Off
10 ON Off ON Off ON Off
11 ON Off ON ON ON Off
12 ON ON
Off Off
ON
Off
Teach and Run EXAMPLE (To teach coin channel 12 for £1 coins.
Switch off the power to the SR3 and set the Program DIL switches to :
MSB LSB TOTAL
SW 1 SW 2 SW 3 SW 4 SW 5 SW 6
ON 0N
OFF OFF
12 ON
0FF
Switch on the power to the SR3.
Press the reject lever within 20 seconds, the LED will turn RED.
Start entering £1 coins until the LED flashes GREEN, typically after 8 to 10 insertions.
NOTE: If the LED turns Green after the 1st coin, then the Teach & Run is DISABLED.
Press the reject lever and the LED will turn GREEN.
The coin channel has now been PROGRAMMED.
SET ALL SWITCHES BACK TO THE 'OFF' POSITION
TEACH & RUN PROGRAMMING (SR3)
12-4 SR3 TEACH & RUN PROGRAMMING