Sega FORD RACING TWIN-FULL BLOWN, Руководство по обслуживанию

Страница: 3 / 111

ii
•
Install and operate the machine only in places where appropriate lighting is available,
allowing warning stickers to be clearly read.
To ensure maximum safety for both customers and operators, stickers and printed instructions
describing potentially hazardous situations are applied to places where accidents could occur.
Ensure that where the product is operated has sufficient lighting to allow any warnings to be read. If
any sticker or printed warning is removed or defaced, do not operate the machine, until it has been
replaced by an identical item.
Before installing the product, check for the Electrical Specification Sticker, SEGA products have a sticker on
which the electrical specifications are detailed. Ensure that the product is compatible with the power supply
voltage and frequency requirements of the location in which the machine is to be installed.
When installing this equipment ensure the socket outlet is near the machine and is easily accessible.
In cases where commercially available monitors and printers are used only the contents relating to this
product are stated in this manual. Some commercially available equipment has functions and reactions not
stated in this manual. Read this manual in conjunction with the specific manual of such equipment.
Descriptions contained herein may be subject to change without prior notification.
The contents described herein are fully prepared with due care. However, should any question arise or
errors be found please contact SEGA.
INSPECTION IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO LOCATION
Normally, at the time of shipment, SEGA products are in a state which allow for immediate usage after
transportation to location. Nevertheless, an irregular situation may occur during transportation. Before
applying power to the product, check the following points to ensure that the procuct has been transported in
a satisfactory status.
•
Is there any external damage to the machine i.e. dents, cuts or cracks?
•
Are the castors or leg adjusters damaged?
•
Do the power supply voltage and the frequency of the machine meet the requirements of the
location?
•
Are all wiring connectors correctly connected and secure?
•
Are the power cables undamaged?
•
Do the fuses meet the specified rating?
•
Are all accessories available?
•
Can all doors be opened and closed and locked with the keys provided?